Future Orion III, Руководство пользователя

Страница: 15 / 52

WC ORION III ENGLISH CDN 1230 REV01.DOCX 15 ORION III
2. Consult your doctor, nurse or therapist to find the best rear
axle set-up for your chair. Do not change the set-up
UNLESS you are sure you are not at risk to tip over.
3. Adjust the rear wheel locks after you make any change to
the rear axles.
a. If you fail to do so, the locks may not work.
b. Make sure wheel locks are embedded in tires at least
1/8 inch when locked.
REAR WHEEL LOCKS
WARNING
Rear wheel locks are NOT designed to slow or stop a moving
wheelchair. Use them only to keep the rear wheels from rolling
when your chair is at a complete stop.
1. NEVER use rear wheel locks to try to slow or stop your
chair when it is moving. Doing so may cause you to veer
out of control.
2. To keep the rear wheels from rolling, always set both rear
wheel locks when you transfer to or from your chair.
3. Low pressure in a rear tire may cause the wheel lock on
that side to slip and may allow the wheel to turn when you
do not expect it.
4. Make sure wheel locks are embed in tires at least 1/8 inch
when locked. If you fail to do so, the locks may not work.