Future light Scan D-200, Руководство пользователя

Страница: 12 / 18

12
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
(QJOLVK
User Manual
SCAN D-200 / SCAN H-250 MKS
CAUTION !
Keep this device away from rain and moisture !
Unplug mains lead before opening the housing !
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BE-
FORE YOUR INITIAL START-UP!
1. Safety
1.1 Safety instructions
This device has left our premises in absolutely perfect conditon. In order to maintain this condition and to ensure
a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written
in this manual. The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorized modification to the device.
CAUTION !
Be careful with your operations.
With a voltage of 230V you can suffer a dangerous electric shock
when touching the vires !
This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth.
The electric connection must be carried out by a qualified employee.
Do not connect this device to a dimmer pack.
For replacement use lamps and fuses of same type and rating only.
CAUTION ! EYEDAMAGES !
Avoid looking directly into the light source
(meant especially for epileptics) !
1.2 General instructions
Use this projector in closed rooms only.
Do not shake this device. Avoid brute force during operational actions.
For safety reasons unauthorized modifications to the device are forbidden.
You can install this projector at any desired place - as long as you follow the given instructions. Ensure that the
structure to which you attach the projector is secure.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damge your device. Leave the device switched off until it
has reached room temperature.
When taking the device into operation, please make sure that the housing is closed firmly with all the
necessary screws tightened up.