Future light Scan D-200, Руководство пользователя

Страница: 14 / 18

14
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
During the installation do not touch the glass-bulbs
bare-handed! Please follow the lamp manufactur-
er’s notes!
Before you close the housing again, make sure
that the lamp is installed tightly into the lampholder
system.
Reclose the housing and tighten the fastenig
screws.
Switch on the device with closed housing only!
3. Installation
3.1 General instructions
DANGER OF FIRE !
When installing the device, make sure there is no highly inflammable
material (decoration articles, etc.) in between a distance of min. 0,5m.
The projector can be installed in any postition without altering its operation characteristics.
Ensure that the structure to which you are attaching
the projector is secure!
For fixing the projector use the hole provided in the bracket. The hole in the adjustable mounting bracket has a
diameter of 8mm.
For overhead use, fit a safety chain or cord.
3.2 Connection to the mains
Model Power Consumption VA
D-200 400VA
H-250 MKS 300VA
Connect the projector to the mains with the lead supplied: Mains plug.
The electric connection must be carried out by a qualified employee.
3.3. DMX 512 connection / Connection between projectors
(QJOLVK
Lampholder System