00083755.DOC, Version 1.2
37/40
Note:
After switching on, the device will automatically detect whether DMX512 data is received or not. If data is
received, the display will show
"DMX XXCH"
with the actually set address. If there is no data received at the
DMX input, this message does not appear.
This situation can occur if:
- the XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
- the wireless receiver is not logged in to the wireless transmitter or no wireless DMX signal is received.
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
DMX Protocol
Mode/Channel
Decimal
Hexad.
Percentage
S/
F
Feature
4
Ch
6
Ch
9
Ch
12
Ch
1 1 1
Red
0
255 00 FF 0%
100%
F Red 0 - 100 % increasing
2 2 2
Green
0
255 00 FF 0%
100%
F Green 0 - 100 % increasing
3 3 3
Blue
0
255 00 FF 0%
100%
F Blue 0 - 100 % increasing
4 4 4
White
0
255 00 FF 0%
100%
F White 0 - 100 % increasing
6
Shutter, strobe
0
10 00 0A 0%
4% S
No
function
11
255 0B FF 4%
100%
F Strobe-effect with increasing speed
Speed internal programs
0
255 00 FF 0%
100%
F Increasing speed
6
Shutter, strobe
0
0 00 00 0%
0% S
Neutral
1
5 01 05 0%
2% S
Music
control
6
10 06 0A 2%
4% S
Neutral
11
255 0B FF 4%
100%
F Strobe-effect with increasing speed
5
Color presets
0
10 00 0A 0%
4%
S No
function
11
30 0B 1E 4%
12% F Red 100%/green increasing/blue 0%
31
50 1F 32 12%
20% F Red decreasing/green 100%/blue 0%
51
70 33 46 20%
27% F Red 0%/green 100%/blue increasing
71
90 47 5A 28%
35% F Red 0%/green decreasing/blue 100%
91
110 5B 6E 36%
43% F Red increasing/green 0%/blue 100%
111
130 6F 82 44%
51% F Red 100%/green 0%/blue decreasing
131
150 83 96 51%
59% F Red 100%/green increasing/blue increasing
151
170 97 AA 59%
67% F
Red decreasing/green decreasing/blue
100%
171
200 AB C8 67%
78% F
Red 100%/green 100%/blue 100%/white
100%
