Future Automation SPS & SA, Руководство по установке

Страница: 24 / 30

22
GENERAL
CONTROL
MECHANISM EMERGENCY STOP CONNECTOR
This mechanism features an Emergency Stop Connector, which MUST be plugged into the control box
in the connector labelled above for the mechanism to operate. If this connector is not plugged in, the
Input Confirmation LED will be permanently lit. As per the red plastic tag attached to the Emergency
Stop Connector (and shown below), the small loop of wire in this connector is designed to be replaced
by a third party safety mechanism.
REPLACING MECHANISM BATTERIES
The standard Future Automation Infrared (IR) remote control required x2 AAA batteries to
operate. These are provided with the mechanism in the Accessories Pack. These batteries can be
replaced as the per the image below.
This mechanism has multiple standard control methods, each of which requires a different input
method to the control box. For ease, the input sockets on the control board are labelled below.
(Control box size and style may vary to image shown)
CONTROL BOX INPUTS
Mains Voltage Input
Input Confirmation LED
IR Input Jack (3.5mm) Emergency Stop Connector
Contact Closure (RJ45)
RS232 (RJ11/RJ25)