Future Automation SPS & SA, Руководство по установке

Страница: 25 / 30

23
INFRARED
(IR)
This mechanism can be controlled via the supplied 14 button Infrared (IR) Remote Control, paired with the
supplied Infrared (IR) lead and sensor.
The mechanism's functions can be controlled by plugging the Infrared (IR) lead and sensor into the 3.5mm IR
Input Jack shown on the General Mechanism Control page.
Confirmation of Infrared (IR) input will be shown by a single flash of the large green LED located on the end of
the control box.
As Infrared (IR) control works over line of site, the Infrared (IR) sensor must be directly viewable from what ever
location the remote control is being used from.
Infrared (IR) Remote Control Button Layout
IMPORTANT
Only buttons indicated above are functional with the product. Any other button press will STOP the
mechanism.
IN -
Brings the mechanism into
the enclosure, hiding the display.
A - Pulses the mechanism IN to
return to User Mode
B - Pulses the mechanism
OUT into service mode to
access rear of screen.
STOP - Immediately stops
the mechanism regardless of
position.
OUT - Brings the mechanism
out of the enclosure, revealing
the display.