Future Automation SPS 1200, Руководство по установке

Страница: 18 / 24

Installation:
Stage 13
Page 17 of 22 // email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
SPS 800 / 1200 - Sliding Panel System Plasma Advance
Fitting the Screen
To return the mechanism from service mode to user mode, press ‘A’ repeatedly
on the remote to pulse the frame work back in. Once the mechanism won’t go
back any further, wait for two seconds, and the mechanism is then in user mode.
In order to fit the screen, the mechanism must be extended to its full reach. Press
‘OUT’ on the remote control and wait for the Plasma Advance mechanism to
reach its pre-set out position.
Once out, press ‘B’ on the remote control repeatedly to pulse the mechanism out
until the frame is extended fully. The mechanism is now in a service mode.
Once extended, the frame can be manually pulled out further, so that the screen
with uprights can be bolted to the frame.
Once the screen is bolted to
the frame, the position of the
screen may require some finer
adjustment.
Adjustments can be made by
altering the position of the
slotted uprights and where the
screen bolted to on the up-
rights.
If more adjustment is still
needed, remove the screen
and make adjustments to the
PS bracket adjusters, as
shown earlier.