In
st
all
at
io
n
:
S
ta
ge
4
AL965 Actuator Lift
Aligning the screen
Align the top of the screen so that it’s
just below the underside of the lid when
the mechanism is in the IN position
When the lift is fully down the screen
needs to be just under the top lid
Mounting holes for
adjusting the screen
plate height
To change the height of the screen
plate loosen the 4 nuts so the locking
strip can run freely. Move the screen
plate up or down to the desired height
then tighten the nuts back up
Locking strip
Nuts x4
Page 8 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
