In
st
al
la
ti
o
n
:
R
F
C
on
tr
ol
Page 15 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
AL965 Actuator Lift
RF Controls
General Wiring
IMPORTANT
If the mechanism is left
without power for more
than 14 days, all memory
positions will be lost. If
this is the case, the
mechanism will need to
be reset, see page 5 for
further information.
Power Supply
Control Box
Keypad
Motors
AC Mains Power
Press and hold to
raise the screen
Press and hold to
lower the screen
When presetting and storing the heights
you need to use the manual keypad
In - Closed
position
Out - Open
position
Manual Keypad
-Use to program
Controller
-Use to operate
Press and hold
for 3 secs to
learn UP position
Press and hold
for 3 secs to
learn DOWN
position
Leave at least 1 second
between commands
Use the manual key pad to move the lift to the desired
up and down position. When in the correct position use
the controller to store the position. Once the up and
down position are stored the controller will move the lift
to these positions.
