Tr
o
u
b
le
S
h
o
o
tin
g
:
AL965 Actuator Lift
Page 16 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
Actuator lift 965 - Trouble shooting guide
Having problems? - Check the following:
1. Are all the connections correct?
2. Is the mechanism being operated correctly?
If the mechanism does not operate correctly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. If this is the case, disconnect the
mains power immediately and contact your installer
Symptom
Cause
Remedy
Page
Power removed for long
periods
Perform system reset
5 or 14
IR receiver not plugged in
Connect IR receiver into 'IR IN' on
interface
15
Remote control or batteries
faulty
Replace batteries or remote
15
Control unit faulty
Contact manufacture
Lid falls back when open
Incorrect cabinet dimensions
Check cabinet dimensions
13
Rubbing noise when opening
Lid push bar not in contact
with felt pad
Re-position felt pad
12
Power removed for long
periods
Perform system reset
6
Remote control faulty or
batteries
Replace batteries or remote
15
Procedure not followed
correctly
Refer to instructions
15
Lift not working
Unable to store positions
