OPERATION
SWITCH ON THE TEMPVIEWER 6400
· Press and hold the Power button [6] for approx. 2 sec. to switch on the device.
· If the battery is sufficiently charged, the tempviewer 6400 will display the start-
up screen. The startup screen will be shown until the shutter resets the image.
· After the startup period, the unit will show a real time infrared thermal image
along with an infrared temperature reading.
LOCK/UNLOCK SCENE TEMPERATURE LEVEL-SPAN
The unit is real 80x80 pixels thermal omager. For better get the object tempera-
ture problem, you can lock the current scene temperature.
If the temperature is higher than the lock temperature, the corresponding color
is white. If the temperature is lower than the lock temperature, the corresponding
color will be black.
· Point the unit an an object or area of intrest
· Short press the Lock button [6] to lock the temperature. The backcolor of the
temperature reading pallet scale [N] will turn grey.
· Short press the Lock button [6] again to unlock the scene temperature range.
CAPTURE / SAVE IMAGES
Place the included micro SD card in the Micro CD Card slot [15] if you want to
save images. The Micro SD card symbol [A] is visible when a card is placed.
· Point the unit at an object or area of intrest.
· Short press the trigger [11] to capturethe image. The shown image will freeze.
The HOLD symbol [H] is visible on the screen.
· If you want to save the image, choose save with the OK button [2]. The image
will be saved on the micro SD card.
OR if you don’t want to save the current image, short press the trigger again.
In both cases the image will unfreeze.
