1
4
6
10
11
12
16
9
7
15
2
3
5
8
13
14
LOCK
MENU
TEMPVIEWER
6400
B
P
Q
O
N
M
L
K
C
D
E
G
F
H
I
J
A
DESCRIPTION
1. TFT Color display
2. Menu / OK button
3. Left Key / Calibrate (CAL) button
4. Up arrow button
5. Down arrow button
6. Power / Back (escape) / Lock button
7. Right Key / Flashlight button
8. Batery cover
9. LED Flashlight
10. Infrared (IR) Imaging lens
11. Trigger
12. Lanyard access
13. Battery Charging LED indicator
14. USB Battery Charging interface
15. Micro SD Card slot
16. 5/8” Tripod connection
A. Micro-SD card symbol
B. Battery indicator
C. Hot temperature Point reading
D. Cold temperature Point reading
E. Center temperature point
F. Lowest termperature point
G. Highest temperature point
H. Image Hold symbol
I. Center Temperature point reading
J. Menu sign
K. Lock sign
L. Current temperature unit
M. Scene low termperature
N. Palette scale
O. Scene high temperature
P. Clock
Q. Current Emissivity Setting
CONTROL BUTTONS AND TRIGGER
Power / Back (escape) / Lock button [6]
· Press and hold for >2 sec. to set the Tempviewer 6400 on or off.
· Press shortly to exit a menu screen
· When the Lock sign [K] is visible on the screen, press short to lock the current
scene temperature range.
OK / Menu button [2]
· Press shortly to access the settings menu.
· Press shortly to confirm, to edit or save (when the Save symbol is visible in the
left lower part of the screen).
Up [4] and Down [5] navigation arrow
· Allows you to scroll in the settings menu
Right Key / Flashlight button [9]
· Press about 2sec. to activate the flashlight of the Tempviewer 6400.
· When the menu is activated, press shortly to confirm.
Left Key / CAL-button [3]
· Press shortly to allow the shutter to reset the image.
· When the menu is activated, press shortly to go one stap back.
