FUTABA SkyLeaf Leader, Инструкция по эксплуатации

Страница: 8 / 20

3
Recommendation: BLS173SVi × 2
The servo is mounted inside the horizontal stabilizer. First, connect the servo to the receiver and place it in
the neutral position.
Attach Horn A to the servo, find the arm that is about 15 degrees forward and cut off the other extra arm.
Remove the servo horn and place the servo on the horizontal stabilizer. While checking the position where
the servo horn exits the horizontal stabilizer, open the horn drive hole in the horizontal stabilizer.
Make the elevator linkage.
Installation of elevator servo. Elevator linkage
9 10
11 12
13 14