FUTABA SkyLeaf Leader, Инструкция по эксплуатации

Страница: 7 / 20

2
Installation of aileron servo. Aileron linkage
Recommendation: BLS173SVi × 4, EXT code 200 mm × 4, S.BUS HUB 120 - 70 × 2
Cut the film at the exit of the servo wire in the center of the main wing. Pass the servo wire inside the main
wing. It is also a good method to guide with a weighted string.
Attach the aileron servo to the mount with a tapping screw.
Attach the control horn to the ailerons.
Using the guide -
#7 (photo) , first make a hole with a 2 mm drill and then create a mounting hole for the
control horn. To determine the position of the control horn with reference to #8 .
Make the aileron linkage. #9-#11
Cut the film of the holes with struts on the main wing.
5 6
7 8