FUTABA SkyLeaf Leader, Инструкция по эксплуатации

Страница: 15 / 20

10
Adhere the tail fins like #47 to the tail bottom of the fuselage. Prepare with sandpaper in advance and paint.
Adhere the fins to the horizontal stabilizer like #48 . Adhere parallel to the fuselage to the position of 190 mm
from the base of the horizontal stabilizer.
Assemble the attached battery mount #50 .
If the size is insufficient, make it from 3 mm wood board from the last figure of this manual.
Attach to the fuselage with 10 mm carbon tube like
#53-#54 . Expand #52 wood plates into 10 mm holes.
After confirming CG with all equipped equipment, adjust the position of battery mount.
Because heavy batteries are installed, firmly adhere.
CG is 150-160 mm from the topwing center leading edge.
First flight makes CG ahead, and afterwards you enjoy the adjustment with taste.
Installation of tail fin
Battery mount, CG position
47 48
49 50