14
Description of Functions
Servo Reverse
Throttle ATV
Steering D/R
This function reverses the rotation direction of the Steering and
Throttle servos.
This function is used to adjust the forward and brake side servo
travel. Each direction can be adjusted independent of each
other. Use this feature to set the throttle servo travel.
Use this function to adjust the steering travel of your
model. If the model understeers (push) while cornering,
add steering by turning the dial clockwise.
When the model oversteers (loose), take away steering
by turning the dial counterclockwise.
When the trim position deviates from the center, the de-
viation will be on the opposite side when the servo is
reversed.
Warning
Be sure that your throttle linkage does not apply
excessive force to the servo.
If your linkage installation causes an unreasonable
amount of force to be applied to the servo. The servo
may be damaged and result in loss of control.
ST.
N
R
N
R
SERVO
REV SW
TH.
(Reversing Switches)
Throttle
N Side: Normal
R Side: Reverse
Steering
N Side: Normal
R Side: Reverse
0
-1
-
2
-
3
- 4
- 5 - 6 -
7
-
8
-
9
-1
0
0
-1
-
2
-
3
- 4
- 5 - 6 -
7
-
8
-
9
-1
0
TH.
ATV
HIGH
LOW
(Throttle ATV)
High Side
0 Side: Travel Minimum
10 Side: Travel Maximum
Low Side
0 Side: Travel Minimum
10 Side: Travel Maximum
Travel
Maximum
Travel
Minimum
Steering D/R
F R E Q U E N C Y
M O D U L AT I O N
