14
PAIRED NOTIFICATION DISPLAY
When the Bluetooth device is paired with the CA-ML700BT, the
Bluetooth Icon will appear on the LCD display. This should
occur whenever you use the system and the paired device is in
range.
HOW TO MAKE A CALL
1. Dial the desired number on the Mobile Phone.
2. Once dialling is in progress, [CALLING] will be displayed
on the LCD screen.
3. When the call is in progress, [TALK] will be displayed on
the LCD along with the elapsed call time.
4. The
ANSWER
button will also slowly flash to
indicate you are in a call.
RECEIVING A CALL
1. If there is an incoming call, audio playback from the
current Source will either be Muted or Paused (depending
on the source) and [PHONE IN] will be shown on the
Display along with the Caller ID if it is enabled by the
Phone/Carrier.
2. Press the
ANSWER
button to accept the call.
3. To Reject the call, press the
ESC/END
button and
it will not be answered.
HOW TO END A CALL
Once in a call, press the
ESC/END
button to end
the call.
TO REDIAL A NUMBER
1. During normal head unit operation, press the
ANSWER
button to call the last number dialled by the paired
mobile phone. [REDIAL] will be displayed on the LCD screen.
2. To confirm press either the
ANSWER
button again or
ENTER
on the Encoder Volume Control. [CALLING] will
be displayed on the LCD screen.
HEAD UNIT / HANDSET CALL TRANSFER
You can transfer the call from the car speakers/head unit
back to the phone during a call by pressing the
ANSWER
button for 2 seconds. [TRANSFER] will be displayed on
the LCD display.
Press the
ANSWER
button again for 2 seconds to
transfer the call back to the head unit.
BLUETOOTH A2DP AUDIO STREAMING
If the connected Bluetooth device supports Advanced
Audio Distribution Profile (A2DP), you can listen to music
stored on the device through the head unit.
BASIC OPERATION
1. Ensure the Bluetooth device is paired with the head
unit.
2. Press the
SOURCE
button repeatedly to select the
BT AUDIO source.
3. Open the music player on the device and select & play
your desired track(s)
