![Furuno WR2120 Скачать руководство пользователя страница 43](http://html1.mh-extra.com/html/furuno/wr2120/wr2120_installation-manual_2350545043.webp)
37
Proper way of using torque wrench:
Caution:
Do not push beyond initial break point.
5) Pull outdoor cable into protective tube.
Cables between SPU and DPU
Protective Tube 1 (P1): AC power cable
LAN cable x2
Cables between SPU and ATU (radome)
Protective Tube 2 (P2): AC power cable (3cores)
Control cable (
HDR-26pin
)
Control cable (HDR-14pin)
LAN cable x1
Protective Tube 3 (P3): Signal cable (3 pcs of Coaxial cable)
6) Make the power plug that running through the SPU to local outlet.
Then plug-in to the local outlet.
7) Activation test.
- Turn ON the breaker.
- Follow the instruction to test it.
RATED AMPERE:
6.5-4.3A (100-150VAC)
3.2-2.7A (200-240VAC)
8) This air conditioner is for cooling SPU
when the temperature goes to the setting
degrees or higher. The way of checking
temperature of setting is shown below:
(1) Press [Set] button to indicate a
temperature
of
setting.
The
temperature should be set on 25
Celsius degrees. If not, press [Up],
[Down] button to make it 25.
(2) Press [Set] button to indicate a
current temperature.
Hold it lightly and must follow to
the tighten direction to apply force.
Bend the head of
wrench a little and stop
[Bad example]
DONOT bend it too much
Alarm lamp (GREEN)
Lamp ON: Cooling ON
Lamp OFF: Cooling OFF
0.5S Lamp Blink: Forced cooling ON
1.0S Lamp Blink: Heating ON
Up button
Alarm lamp (RED)
Lamp ON: Alarm occurs
Lamp Blink: Forced heating ON
Display (Temperature will indicate when power up)
Setup button
Down button
P2
P3
P1
Содержание WR2120
