Furuno WR2120, Руководство по установке

Страница: 36 / 73

30
3) Normally 4 threaded bolts will be enough while windless. It can insert up to 8 bolts to set
radome stable against the wind conditions.
Set the nut to make10 mm space from the end, and fasten the spring clamp around the center
of bolt as shown below
.
4) Insert each threaded bolt thru holes from the bottom radome to fix them by the nut inserts by
hands.
Figure 4.17: E xample using 8 bolts.
10mm
Caution:
Rotate the antenna to position
feed pipe vertically to ensure no
contact to tip part of antenna
when lifting radome top.
Set the nut
downward
Fasten the
spring clamp
at the center