Furuno RP-17, Руководство оператора

Страница: 21 / 48

5-3
5.3 Editing, Deleting Waypoints
Editing waypoints
1. Press [MENU], [1], [1], [4], [4], [4], [4] to
display the waypoint list.
2. Use the trackball to select waypoint to
edit.
3. Use the trackball to select digit to change.
4. Press appropriate numeric key.
5. Press the [ENTER/SELECT] key followed
by the [MENU] key.
Deleting waypoints by the cursor
1. Operate the trackball to place the cursor
on the waypoint you want to delete.
2. Press the [CANCEL/CLEAR] key.
Deleting waypoints through the
waypoint list
1. Press [MENU], [1], [1], [4], [4].
2. Press the [4] key twice to select List.
3. Use the trackball to select the waypoint
to erase.
4. Press the [CANCEL/CLEAR] key to de-
lete waypoint.
5. Press the [ENTER/SELECT] key followed
by the [MENU] key to finish.
5.4 Creating Routes
In many cases a trip from one place to an-
other involves several course changes, re-
quiring a series of route points (waypoints)
which you navigate to, one after another.
The sequence of waypoints leading to the ul-
timate destination is called a route. The RP-
17 can automatically advance to the next
waypoint on a route, so you do not have to
change the destination waypoint repeatedly.
The figure below shows an example of a route
between two ports, involving six waypoints.
You can store up to 10 routes. A route may
contain up to 30 waypoints.
WPT 01
WPT 02
WPT 03
WPT 04
WPT 05
WPT 06
FORWARD
REVERSE
Transit
Order
Waypoint
WPT 06
WPT 05
WPT 04
WPT 03
WPT 02
WPT 01
PORT
PORT
1
2
3
4
5
6
Figure 5-3 Sample route
Creating routes by the cursor
1. Press the [MENU] key.
2. Press the [1] key twice to select Video
Plot.
3. Press the [5] key twice to select Route.
1. Mode = Cursor WPT No. List
2. Speed for TTG = 10.0kt
(Route List)
No. Disp Pts Total TTG
1 YES 30 1234.56 nm 12345.6H In use
2 YES 5 2345.67 nm 12345.6H
3 YES 0 *999.99 nm *9999.9H
4 YES
8 YES
9 YES
10 YES 0
0.00 nm _ _._H
Select mode and route no. by using trackball.
Display: + Not display: -
Enter: ENT
Delete: CLR
Route
s
Figure 5-4 Route menu
4. Press the [1] key to select Cursor, and
press the [ENTER/SELECT] key.
5. Press the [2] key to select Speed for TTG.
6. Key in ship’s speed with the numeric keys.
(This allows for automatic calculation of
time-to-go to waypoints.)
7. Press the [ENTER/SELECT] key.
8. Select route number with the trackball.