Furuno RP-17, Руководство оператора

Страница: 16 / 48

4-2
Entering marks at own ship’s position
1. Select OS Position at step 5 in “Selection
of mark entry method.”
2. Press the [MARK] key. A mark is placed
at own ship’s position.
Entering marks on the radar/video
plotter, video plotter displays
Marks can be entered on the radar/video plot-
ter and video plotter displays by cursor or at
own ship’s position.
Selection of mark
1. Press the [MENU] key.
2. Press the [8] key twice to display the Mark
menu.
1. Mark Selection = 01
01 Origin Mark
02 Waypoint
•
03 04
05 06
07 08
09 10 X
11 12
13 14
15 16
−
17
18 Prohibited Area
19 Cable
20 Erase Mark
2. MOB
3. Display
On Off
4. Mark Color
RED PNK PPL ORG
5. Position Correction
*
* : WHT on FR-1710/1725/1760DS.
Figure 4-2 Mark menu, video plotter mode
(FR-1500 MARK-3 Series)
3. Press the [1] key to select Mark Selec-
tion. Use the numeric keys to enter mark
or line number desired.
4. Press the [ENTER/SELECT] key.
Note: To inscribe another line, press the [1]
key, key in line number (type) shown on the
Mark menu, press the [ENTER/SELECT] key,
and the repeat steps 2 and 3. To inscribe
more than two of the same type of line, after
completing a line, press [1] [2] [1] to select
Erase Mark, press the [ENTER/SELECT] key
and then press [1] to select line type.
Entering marks by cursor
1. Select mark desired as described in “Se-
lection of mark.”
2. Place cursor on location where to inscribe
a mark.
3. Press the [MARK] key. To inscribe two or
more separate lines do the following:
a) On the MARK menu, press the [1]
key to select Mark Selection.
b) Key in [2], [1] (Mark Erase).
c) Press the [ENTER/SELECT] key.
d) Press the [1] key again, enter line
number desired and press the [EN-
TER/SELECT] key.
e) Repeat steps 2 and 3 in this proce-
dure to complete the line.
Entering marks at own ship’s position
1. Enter [0], [2] at step 3 in “Selection of
mark.”
2. Press the [MARK] key.