Furuno NAVpilot-500, Руководство по установке

Страница: 34 / 67

3. ADJUSTMENTS
3-4
When selecting “USE ARROW ( ◄► ) KEYS”
a) Press the [PORT] (or [STBD]) key until the indicator is completely filled (in black).
b) Remove the appropriate rubber cap of the cylinder to bleed air.
c) Press the [STBD] ([PORT]) key until the indicator is completely filled (in black).
d) Remove the appropriate rubber cap of the cylinder to bleed air.
e) Repeat steps a) through d) to bleed air completely.
f) Press the [MENU] ([TURN/MENU]) key twice to finish.
When selecting “USING RRU”
a) Remove the rod from the rudder reference unit slowly, and then set the arm of the
rudder reference unit to 0 point (notch of the unit).
b) Move the arm of the rudder reference unit to port more than 10 degrees.
The rudder moves to port direction.
c) Repeat steps a) and b) to bleed air from the oil cylinder for starboard.
d) Press the [MENU] ([TURN/MENU]) key twice to finish.
3.2.4 Selecting boat type
Select your boat type: PLANING, SEMI_PLANING or DISPLACEMENT depending on your
boat specification. The type of boat selected affects the steering parameters and the
functions available in the autopilot system.
1. Rotate the course control knob to select “BOAT TYPE”.
2. Press the course control knob to show the boat type options window.
SEMI_PLANING
DISPLACEMENT
PLANING
Boat type options window
3. Rotate the course control knob to select PLANING, SEMI_PLANING or
DISPLACEMENT as appropriate.
4. Press the course control knob to close the window.
3.2.5 Entering boat length
Enter the actual boat length, between 1 and 80 feet (0.3 and 24.4 m). This length may affect
the steering parameters.
1. Rotate the course control knob to select “BOAT LENGTH”.
2. Press the course control knob and the current value is circumscribed with a double
rectangle.
3. Rotate the course control knob to set the boat length.
4. Press the course control knob to finish.