Furuno NAVpilot-500, Руководство по установке

Страница: 32 / 67

3. ADJUSTMENTS
3-2
3.2 DOCKSIDE SETUP Menu
The DOCKSIDE SETUP menu provides for initial setup of the equipment.
1. Open the INSTALLATION menu.
2. Rotate the course control knob to select “DOCKSIDE SETUP”.
3. Press the course control knob to show the DOCKSIDE SETUP menu.
DRIVE UNIT: SOLENOID
SELECT RRU: FURUNO RRU
AIR BLEEDING:
NO
BOAT TYPE:
PLANING
BOAT LENGTH:
35 ft
(10.7 m)
MAXIMUM SPEED:
30 kt (55.6 km/h)
ADJUST RUDDER REF. UNIT
AUTO RUDDER LIMIT:
10
MANUAL RUDDER LIMIT: 20
RUDDER TEST: NO
RATE OF TURN: 3 /s
COMPASS TYPE: PG-500
COMPASS BAUD RATE: 4800
SET CENTER RUDDER POSITION
PUSH MENU KEY TO RETURN
TO PREVIOUS MENU.
DRIVE UNIT: SOLENOID
SELECT RRU: FURUNO RRU
AIR BLEEDING: NO
BOAT TYPE: PLANING
BOAT LENGTH: 35 ft (10.7 m)
MAX. SPD.: 30 kt (55.6 km/h)
ADJUST RUDDER REF. UNIT
AUTO RUDDER LIMIT:
10
MANUAL RUDDER LIMIT: 20
RUDDER TEST: NO
RATE OF TURN: 3 /s
COMPASS TYPE: PG-500
COMPASS BAUD RATE: 4800
SET CENTER RUD. POS.
PUSH MENU KEY TO RETURN
TO PREVIOUS MENU.
Navpilot-500 Navpilot-511
Dockside setup menu
3.2.1 Selecting your drive unit
At the first of all, the drive type of your boat should be selected among from REVERSIBLE
24V, REVERSIBLE 12V and SOLENOID.
1. Open the DOCKSIDE SETUP menu.
2. Rotate the course control knob to select “DRIVE UNIT.”
3. Press the course control knob to show the drive unit options window.
REVERSIBLE 12V
SOLENOID
REVERSIBLE 24V
Drive unit options window
4. Rotate the course control knob to select REVERSIBLE 12V, REVERSIBLE 24V or
SOLENOID depending on your boat.
5. Press the course control knob to close the window.