Furuno GP-1640, Руководство оператора

Страница: 74 / 96

11-4
6. Press the GO TO soft key. Soft key titles
change. If GO TO key is not displayed,
press the cursor pad.
DGPS 3D
CANCEL
GO TO
FROM
OS 0.26 nm
180.2˚
QUICK
ROUTE
NEAR
SRVICE
GO TO
PUNTA CORNACCHIA
ACCO AMENO
I. ISCHIA
CASAMICCIOLA
ISCHIA PORTO
40˚45.971'N
13˚57.462'E
+
Plotter display
7. Press the NEAR SRVICE soft key.
The SELECT PORT SERVICE window
appears.
Currently selected icon
SELECT PORT SERVICE
Health emergency
SELECT PORT SERVICE window
8. Use the cursor pad to select service mark
desired. Currently selected icon is
circumscribed. The name of currently
selected icon appears at the top of the
window. Refer to the user's manual of
C-MAP NT for details about the icons.
9. Press the ENTER soft key or the [ENTER]
key. Then, the display shows the locations
of those services nearest you.
DGPS 3D
CANCEL
GO TO
FROM
OS 0.26 nm
180.2˚
ENTER
GO TO
PUNTA CORNACCHIA
ACCO AMENO
I. ISCHIA
CASAMICCIOLA
ISCHIA PORTO
40˚45.971'N
13˚57.462'E
+
SELECT ICON BY
KEY.
Sample filling station locations
10. Press ▲ or ▼ to place the "hand cursor"
on the port service icon desired and press
the ENTER soft key or the [ENTER] key.
DGPS 3D
CANCEL
GO TO
FROM
QP<01> 0.26 nm
180.2˚ GO TO
PUNTA CORNACCHIA
ACCO AMENO
I. ISCHIA
CASAMICCIOLA
ISCHIA PORTO
40˚45.971'N
13˚57.462'E
+
USE SOFT KEYS TO MAKE
ROUTE THEN PRESS "ENTER"
ZOOM
IN
ZOOM
OUT
ADD
QP
ERASE
LST QP
Make route window
11. Do one of the following:
Go directly to port service selected:
Press the [ENTER] key. The own ship and
the port service is connected by a line. The
range and bearing form own ship to the port
service appears at the navigation data
display.
You can go to the port service directly by
steerings the ship to the hearing indicated.
Go to port service selected via waypoints,
make a route as follows:
a)
Move the cursor to the nearest waypoint
of the port service.
b)
Press the ADD QP soft key.
c)
Repeat the above steps a) and b) to enter
other waypoints.