Furuno GP-1640, Руководство оператора

Страница: 12 / 96

1-2
1.2 Inserting Mini Chart
Card
Insert appropriate mini chart card before
turning on the power.
1. Push down the lid catch to open the mini
chart card slot cover.
Card slot
Location of mini chart
card slot cover
2. Insert appropriate mini chart card groove
side up.
3. Close the slot cover to protect the chart
drive. (Keep the slot cover closed at all
times.)
Note:
Turn off power before inserting or
ejecting the mini chart card.
1.3 Turning the Power
On/Off
Press the [POWER/BRILL] key at bottom
left-hand side of the display unit to turn on the
power. When the unit is turned on, it proceeds
in the sequence shown below, after displaying
the FURUNO information display.
Displayed for about five seconds.
Displayed for about 30 seconds,
or press any key to escape.
The last-used display appears.
NO NATIONAL HYDROGRAPHIC OFFICE
HAS VERIFIED THE INFORMATION
IN THIS COASTLINE DATA CARD AND
NONE ACCEPT LIABILITY FOR THE
ACCURACY OF REPRODUCTION OR ANY
MODIFICATIONS MADE THEREAFTER.
THIS PRODUCT WITH THIS COASTLINE
DATA CARD DOES NOT REPLACE THE
REQUIREMENT TO USE THE
APPROPRIATE PRODUCTS FOR
NAVIGATION ACCORDING TO NATIONAL
AND INTERNATIONAL REGULATONS.
– – WARNING – –
FURUNO ELECTRIC CO., LTD.
PROGRAM OK
RAM OK
BACKUP DATA OK
INTERNAL BATTERY OK
GPS OK
START UP TEST
Start-up sequence
Your equipment takes about 90 seconds to find
its position when turned on for the very first
time. This is because the equipment has no
satellite data, called the Almanac, in its
database. If you want to lessen the time
needed to find position you may enter your
position manually (default position: San
Francisco, USA) on the GPS SETUP
OPTIONS menu.
Thereafter it takes about 12 seconds to find
position each time the power is turned on.
When the satellite signal is being received
normally, the equipment displays various
abbreviations at the bottom left-hand corner of
the display which show GPS receiver status.
The following table shows these abbreviations
and their meanings.
Display abbreviations
Indication Meaning
GPS 2D
Normal 2D (dimension) GPS
position fix
GPS 3D Normal 3D GPS position fix
NO FIX Position can not be found.
DEMO Simulation mode
DOP DOP error
DGPS 2D*
Normal 2D differential GPS
position fix
DGPS 3D*
Normal 2D differential GPS
position fix
GPS W2D 2D WAAS position fix
GPS W3D 3D WAAS position fix
*: Only when connecting with the external DGPS
beacon receiver.
Turning the power off
Press and hold down the [POWER/BRILL] key
until the screen goes blank. The time
remaining until the power is turned off is shown
on the screen.