Furuno FSS-3BB, Руководство оператора

Страница: 47 / 121

1. OPERATION
1-35
1
1.27.2 How to load settings
Previously saved settings can be loaded from their save location, either internal or ex-
ternal location, at any time.
Note: When the load procedure is complete, previous settings cannot be restored.
Check that the settings to be loaded are correct before starting the procedure.
How to load settings from internal memory
1. Click the [Advanced Settings] icon ( ) from the InstantAccess bar™, then click
the [Internal Setting] icon ( ) to show the internal setting save/load icons.
2. Click the [Load Settings] icon ( ) to show the load slot icons.
3. Click the load slot icon ( - ) that you want to use. The system applies the load-
ed settings.
How to load settings from an external memory
Note: This method requires connection to an external memory device. If there is no
device connected, the [Load External Unit Settings] icon shown in the procedure be-
low are not available (greyed out).
1. Click the [Advanced Settings] icon ( ) from the InstantAccess bar™ to show the
[Advanced Settings] menu. then click the [External Setting] icon ( ) to show the
external setting save/load icons.
2. Click the [Load External Unit Settings] icon ( ). A pop-up window listing the avail-
able settings files appears.
Note: If there is no external memory connected, the [Load External Unit Settings]
icon is greyed out and not selectable.
3. Select the settings file to load, then click the [OK] button to finish and close the
pop-up.
Folder is greyed out if no settings have been
saved to the folder.
Select File
Cancel