Furuno FMD3100, Руководство оператора

Страница: 93 / 395

3. HOW TO MANAGE CHARTS
3-23
How to delete a group of chart cells
You can delete group of chart cells as follows:
1. In the Chart maintenance mode, click the [Manage Charts] button on the
InstantAccess bar™ to show the [Filter] window.
2. Click the [Edit] button.
3. Select the name of the group with the pull-down list at the item [Group Name].
4. Click the [Remove] button.
5. Click the [OK] button.
6. Click the [Close] button.
How to select the group to view
In the Chart maintenance mode, click the [Manage Charts] button on the
InstantAccess bar™ to show the [Filter] window. Check [Group] then select the group
to view from the pull-down list at [Group].
3.16.2 How to view status of chart cells
The [Cell Status] dialog box shows the status of the chart cells stored in the system.
To show this dialog box, get into the Chart maintenance mode then click the [Cell Sta-
tus] button on the InstantAccess bar™.
• Type : Type of chart cell, ENC, C-MAP or ARCS.
• Chart Name : Chart name
• Data Server : The name of the data server where the chart was downloaded from.
• Edition/Issue Date : Edition no. and issued date of the chart cell.
• Update: Num/Date : No. and date of the update of the chart cell.
• Status :
• [up to date]: Cell is up-to-date.
• [not up to date]: Cell is not up-to-date.
• [not installed]: Cell is not installed.
• [withdrawn]: Cell has been canceled.
• [unknown]: Cell is not delivered as part of a data server service (ex. unencrypted
ENC).
• [broken]: Cell is corrupted.