Furuno FMD3100, Руководство оператора

Страница: 143 / 395

8. CHART ALERTS
8-3
8.1.2 How to select objects used in chart alerts
You can also include calculation areas that have to be noted when sailing (for exam-
ple, restricted areas). To include these areas in chart alerts, do the following:
1. Click the [DISP], [SET] and [Chart Alert] buttons on the InstantAccess bar
™
to
show the [Chart Alert] page.
2. Click a letter indication to select the type of alert, warning or caution, to receive for
the given chart object. [Safety Contours] is fixed to “A” (Alarm).
•
W: Warning, visual and aural alerts
• C : Caution, visual alert only
• No display (OFF): No alert notification. Available with objects other than [No
Vector Chart].
3. Click the box to the right of the letter indication to show a check mark and show
the alert. Click the box again to remove the check in the box and hide the alert.
Checked alerts are highlighted according to priority:
•
A (Alarm): Red color highlight
• W (Warning) and C (Caution): Yellow color highlight
4. Click the [Save] button to finish.
Note: C-MAP PROFE charts may take several minutes to identify danger
areas.
List of areas
There are the areas that the ECDIS detects and provides the audible alert and/or vi-
sual alert if estimated own ship position or planned or monitored route crosses the
area defined on the [Chart Alert] page. You can choose from the following areas:
• Safety Contour
• Navigational Hazard
• Areas To Be Avoided
• User Chart Danger
• Traffic Separation Zone
• Inshore Traffic Zone
• Restricted Area
• Caution Area • Offshore Production Area
• Military Practice Area
• Seaplane Landing Area
• Submarine Transit Lane
• Anchorage Area
• Marine Farm/Aqua Culture
• PSSA Area
• No Vector Chart • Too Many Dangers
• UKC Limit
• Sounding UKC Limit
• Non-official ENC
• Not Up-to-date
• Permit Expired