1. OPERATION
27
1. Select Data Box1 and press the
ENTER
key.
2. With Data Box1 selected, press the
EN-
TER
key.
3. Press
T
to select On if it is not already se-
lected. All menu items are shown in black,
meaning they are available for selection.
4. Use
S
or
T
to select a data and then
press the
ENTER
key.
5. Use
S
or
T
to select Off or On as appro-
priate and press the
ENTER
key.
6. Repeat steps 4 and 5 as necessary.
7. Use
S
or
T
to select Switching Cycle and
then press the
ENTER
key.
8. Use
S
or
T
to select desired display in-
terval and then press the
ENTER
key.
9. Set up data box 2 similar to how you did
data box 1.
Bearing:
Select how to display bearing data,
fed from navigator. The choices are true and
magnetic.
Nav Data:
Select source of position data,
among GPS, Loran C, and Auto.
Auto
selects
navigator in order of accuracy in case of mul-
tiple navigators. The order is GPS followed by
Loran C.
Wind Spd/Dir:
Display wind speed and direc-
tion data in True or Apparent. The
apparent
wind
is the actual flow of air acting upon a
sail, or the wind as it appears to the sailor. The
true wind
is the wind seen by a stationary ob-
server in velocity and direction.
Trip Source:
Select source for trip data cal-
culation. The choices are Own (internal speed
sensor) and NMEA (speed data from external
navigator).
Temp Source:
Select source for water tem-
perature data. The choices are Own (internal
temperature sensor) and NMEA (temperature
data from external navigator).
Trip Reset:
Select Yes to reset trip meter to
zero. A few beeps sound after resetting is
completed.
Speed Source:
Select source for speed data.
The choices are Own (internal speed sensor)
and NMEA (speed data from external naviga-
tor).
Odo Reset:
Select Yes to reset the odometer
to zero. A few beeps sound after resetting is
completed.
Timer counts time up from 0H00M to
99H59M. Can be reset to zero with the
[MARK] key.
*
