3. MAINTENANCE
3-6
E0445
No Sensor Data. (PITCH/ROLL) Invalid pitch/roll data received. Confirm
that the equipment that outputs pitch/roll
data works correctly.
E0446
No Sensor Data. (COG/SOG)
Invalid COG/SOG data received. Confirm
that the equipment that outputs COG/
SOG data works correctly.
E0447*
No Sensor Data. (CTW/STW1)
Invalid CTW/STW data received. The
number in the brackets indicates radar
number.
Confirm that the equipment that outputs
CTW/STW data works correctly.
E0448*
No Sensor Data. (CTW/STW2)
E0449*
No Sensor Data. (CTW/STW3)
E044A*
No Sensor Data. (CTW/STW4)
E044B*
No Sensor Data. (CTW/STW5)
E044C*
No Sensor Data. (CTW/STW6)
E044D*
No Sensor Data. (CTW/STW7)
E044E*
No Sensor Data. (CTW/STW8)
E044F*
No Sensor Data. (CTW/STW9)
E0520
No Camera Data
No camera data received. Check the con-
nection between the LAN 2 port on the
main PC and PoE adapter and IP camera.
Confirm that power is supplied to the PoE
adapter.
E0530
No Camera Data
Communication timeout with the IP cam-
era. Check the connection between the
LAN 2 port on the main PC and PoE
adapter and IP camera. Confirm that pow-
er is supplied to the PoE adapter.
E0601
Network Error.
The system cannot connect with the route
data server. Check the connection be-
tween the LAN1 port on the main PC and
ECDIS.
E0602
Excessive Data.
More than 200 waypoints are included in
a route. Use the route data where the
number of waypoints is 200 or less.
E0701
Network Error.
The system cannot connect with the ENC
chart server. Check the connection be-
tween the LAN1 port on the main PC and
ECDIS.
E0702
Network Error.
The ENC chart file does not exist on the
server. Check that the position data is in-
put to the ECDIS.
E0703
User Permit not found.
The system cannot find the ENC user per-
mit. Check that the ENC dongle is insert-
ed to the main PC. When the error keeps
occurring for one minute or more after
checking the ENC dongle connection, re-
start the system.
E0704
Decode Error.
Decode error occurs. Confirm that the
user permit is the same as the one on the
ECDIS connected to this system and the
one stored to the ENC dongle.
E0705
Excessive Data.
There are too many data in the ENC
chart. This system cannot show the ENC
chart objects while this error occurs.
Error
code
Error message
Meaning/Remedy
Содержание ENVISION AR-100M
Страница 1: ...AR NAVIGATION SYSTEM AR 100M OPERATOR S MANUAL www furuno com Model ...
Страница 10: ...EQUIPMENT LIST viii This page is intentionally left blank ...
Страница 64: ...3 MAINTENANCE 3 16 This page is intentionally left blank ...
Страница 73: ......
