Furuno ENVISION AR-100M, Руководство оператора

Страница: 4 / 73

ii
SAFETY INSTRUCTIONS
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
WARNING
CAUTION
Warning, Caution Prohibitive Action Mandatory Action
WARNING WARNING
Be sure to power each unit with
proper voltage.
Connection of an improper power supply
can cause fire or damage the equipment.
Turn the system off before cleaning
and doing maintenance.
Turn off the power immediately if you
feel the equipment is acting
abnormally.
If the equipment is hot to touch or is
emitting strange noises, turn the power
off immediately and contact your delaer
for advice.
CAUTION
Do not open the equipment unless
totally familiar with electrical circuits.
Only qualified personnel can work inside
the equipment.
Turn the power off before beginning
the installation.
Be sure both the system and all external
devices are turned off. Sudden surge of
power could damage the equipment.
The operator and installer must read the applicable safety instructions before attempting to operate or
install the equipment.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury
can occur.
Turn the power off immediately if the
equipment is emitting smoke or fire.
Fire or electrical shock can result if the
power is left on.
The mounting location must satisfy
the operating temperature range of the
equipment.
Do not install the equipment where it
may get wet from rain or water splash.
Water can cause fire or electrical shock,
or damage the equipment.
Do not operate the equipment with wet
hands.
Electrical shock can result.
Do not depend on one navigation
device for the navigation of the vessel.
Always check your position against all
available aids to navigation, for the safety
of vessel and crew.
Do not connect/disconnect a cable
from the main PC while turning the
power on.