Furuno DFF1-UHD, Руководство оператора

Страница: 16 / 40

2. WIRING
8
How to process the cable for the external KP
1. Process the PH connector (02-1097, optional supply) as shown below.
a) Make the length of the wires of the PH connector 100 mm.
b) Remove the sheath from the cores 10 mm.
c) Fold back the cores in half.
d) Attach crimp-on lug NCW-1.25 to each core.
2. Remove the armor 170 mm and cut off the vinyl sheath 90 mm.
3. Remove 5 mm of the vinyl sheath from the cores then connect each crimp-on lug (attached at
step 2) as shown below.
4. Wrap the armor with vinyl tape.
(b)
Approx. 10 mm
(a)
Approx. 100 mm
(c) (d)
Fold back core.
Armor
MPYC-4
Approx. 210 mm
Vinyl sheath
Approx. 90 mm
Approx. 5 mm
This part is fixed
with the lock nut
inside the unit. This part is fixed
with the cable
clamp.
Armor
Tape here.
Vinyl sheath
Crimp-on lug
NCW-1.25