Furuno CH-500, Руководство оператора

Страница: 83 / 109

5. MENU OPERATIONS
5-13
5.13 How to Use the Simulation Mode
The simulation mode uses internal data to portray echoes on the screen and give you
a better idea of how come functions and settings work.
The simulation mode does not require connection to a transducer and all sonar func-
tions are available.
Note 1: During simulation, the system will not detect any actual echoes. Do not use
the simulation mode when underway, for safety.
Note 2: When the simulation mode is active, the indication "SIM" appears at the top
of the screen.
To start or stop the simulation mode, do the following:
1. Referring to section 5.5, open the [System] menu.
2. Press
T
or
S
to select [Simulation], then press
X
. The [Simulation] settings win-
dow appears.
3. Press
X
or
W
to select the appropriate option.
• [No]: Simulation is stopped, normal operations and functions are all available.
• [Load Internal Data]: Start the simulation using data stored in the Transceiver
Unit.
4. Press the MENU key to confirm the selection and either start or stop the simula-
tion.
5. Press the MENU key again to close the menu.
Simulation settings
Simulation mode: No Load Internal Data
: Change Menu: Apply