Furuno CH-500, Руководство оператора

Страница: 77 / 109

5. MENU OPERATIONS
5-7
5.7 How to Adjust the Preset Range Settings
The Range Settings menu contains the range presets. You can change the presets to
suit your requirements as follows:
1. Referring to section 5.5, open the [System] menu.
2. Press
T
to select [Range Settings], then press
X
to open the [Range Settings]
menu.
The available setting range for each mode is shown at the top-right of the menu
window.
3. Press
X
or
W
to select the mode for which to change the preset range. The se-
lected mode is highlighted in a manner similar to that indicated in the above figure.
4. Press
T
or
S
to select the preset number to change.
5. Press
X
to increase the range or
W
to decrease the range.
The range changes in five meter increments between 10 m and 100 m. Between
100 m and the maximum range, the range changes in ten meter increments.
6. Press the MENU key several times to close the menu.
How to restore the default range presets
You can restore the default preset ranges for each mode individually.
1. Referring to section 5.5, open the [System] menu.
2. Press
T
to select [Range Settings], then press
X
to open the [Range Settings]
menu.
3. Press
T
to select [Restore Default Settings], then press
X
. A confirmation window
appears.
4. Press
X
to select [Yes], then press the MENU key.
To cancel the procedure, select [No], then press the MENU key.
Range Settings
Menu HOR. VERT ES
: Select : Change Menu: Apply
1
2
3
4
5
6
7
8
9
1 0
1 0
(10~2400m)
2 0
4 0
6 0
8 0
1 0 0
1 2 0
1 6 0
2 0 0
2 5 0
3 0 0
4 0 0
5 0 0
6 0 0
1 1
1 2
1 3
1 4
1 5
Restore Default Settings No Yes
Setting
range
available
Selected
mode
1 0 0 0