Furuno CAN bus Network Design Guide
6
Fig.13 Female Micro connector
Fig.14 Male Micro connector
The following list shows the backbone/drop cables. To extend the backbone cable, use the
cable with a male connector on one end and a female connector on the other. For example, if
you need 15 meter cable, connect two 6 m cables, a 2 m cable, and a 1 m cable. Either heavy
cable or light cable is used as a backbone cable.
Note that the length of drop cable is 0 to 6 m.
Parts
Name
Type
Code
Number
Connector
fitted
CAN bus light cable (1 m) M12-05BM+05BF-010 000-167-962
Male and Female
CAN bus light cable (2 m) M12-05BM+05BF-020 000-167-963
Male and Female
CAN bus light cable (6 m) M12-05BM+05BF-060
00-167-964
Male and Female
CAN bus light cable (1 m) M12-05BFFM-010 000-167-965 Female
CAN bus light cable (2 m) M12-05BFFM-020 000-167-966 Female
CAN bus light cable (6 m) M12-05BFFM-060 000-167-967 Female
CAN bus heavy cable (1 m) CB-05PM+05BF-010
000-167-968
Male and Female
CAN bus heavy cable (2 m) CB-05PM+05BF-020
000-167-969
Male and Female
CAN bus heavy cable (6 m) CB-05PM+05BF-060
000-167-970
Male and Female
CAN bus heavy cable (1 m) CB-05BFFM-010
000-167-971
Female
CAN bus heavy cable (2 m) CB-05BFFM-020
000-167-972
Female
CAN bus heavy cable (6 m) CB-05BFFM-060
000-167-973
Female
Fig.15 CAN bus light cable Fig.16 CAN bus light cable
with a connector at both ends
with a connector at one end
5 4
3
2
1
14.5 mm
3
2
1
5
4
14.5 mm
6 mm
