CCD-0006038 Rev: 09-21-22
- 6 -
English
Fig. 2
PMA Screws 5/16" x 4
4. Slide the microwave oven into the cabinet opening. (Fig. 3)
Fig. 3
5. Attach the microwave oven to the cabinet with 4pcs M4 x
5/8” screws. (Fig. 4)
Fig. 4
PMA Screws 5/8” x 4
Standard Trim Kit Installation
Metal Bracket x 2
M4 x 13⁄16" screw x 4
Short Strip x 2
Long Strip x 2
M4 x ½" Screw x 4
1. Take out the microwave oven and the component(s) from
box and put on a flat surface.
2. Attach the left and right metal brackets to the microwave
oven and attach with 4pcs M4 screw x 1/2” provided. (Fig.
5)
Fig. 5
3. Slide the microwave oven into the cabinet opening. (Fig. 6)
Fig. 6
4. Attach the microwave into the cabinet with 4pcs M4
screw x 13/16” provided. (Fig. 7)
Fig. 7
5. Assemble the trim kit as shown in (Fig. 8).
NOTE:
DO NOT assemble reversed.
Fig. 8
6. Install the assembled trim kit over the microwave oven
and push until it snaps into place. (Fig. 9)
Fig. 9
Electrical Connection
Connect the microwave oven to a 120 volt, 60 Hz, AC only,
15 amp or 20 amp dedicated circuit. It is recommended that
an individual circuit serving only the microwave oven be
provided.
