Step 5
Page 6 of 6
I.
Prepare a complete bed slat by inserting one center
plastic connector (#F) onto the ends of two bed slats (#6).
Then connect two end caps (#G) onto the other ends of
the bed slats (#6).
II.
Align the end caps (#G) with the pre-drilled holes on each
side of the side rails (#2) and snap both ends to lock in
place. Then snap the center plastic connector (F) onto the
central support rail (#4).
III.
Repeat the above process for the remaining bed slats.
ASSEMBLY IS COMPLETED
Note: The correct position of the bed
slats should be arcing UPWARD
when placing on the rails.
#F x 13 pcs
#G x 26 pcs
Содержание CM7060IV-F
Страница 2: ...Page 2 of 6...