Step 3
Step 4
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 5 of 6
Enlarged
#B x 2 pcs
#D x 2 pcs
#E x 2 pcs
I.
Align the two slat support legs (#7) with the pre-drilled holes of the
central support rail (#4).
II.
Prepare 2 bolt assemblies by inserting FIRST the lock washer (#E) onto
the bolt (#B) and then the flat washer (#D) onto the SAME bolt (#B), in
that order.
III.
Insert the two bolt assemblies through the pre-drilled holes of the central
support rail (#4) using the Allen wrench (#H) to lock them in with the slat
support legs (#7)
Adjust the leveler according to the ground
level. To lower or to raise the slat support
leg, you need to turn the leveler clockwise
or counterclockwise, respectively.
I.
Align the central support rail
(#4) with the pre-drilled
holes on the center of the
headboard (#1) and the
footboard (#3). Prepare 4
bolt assemblies by inserting
FIRST the lock washer (#E)
onto the bolt (#B) and then
the flat washer (#D) onto
the SAME bolt (#B), in that
order.
II.
Insert the 4 bolt assemblies
through the brackets of the
central support rail (#4)
using the Allen wrench (#H)
to lock them in with the
headboard (#1) and the
footboard (#1).
Enlarged
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
Содержание CM7060IV-F
Страница 2: ...Page 2 of 6...
