Furniture of America CM7060IV-F, Руководство по сборке

Страница: 4 / 6

Step 1
I. Prepare 4 bolt assemblies by inserting
FIRST the lock washer (#E) onto the
bolt (#A) and then the flat washer (#D)
onto the SAME bolt (#A), in that order.
II. Insert two bolt assemblies through each
side of the pre-drilled holes of the
headboard (#1) using the Allen wrench
(#H) but expose about ½” of the bolts’
threads.
III. Mount the brackets of the side rails (#2)
onto the bolts (#A) on each side of the
headboard (#1). Make sure all the
washers are in the FRONT of the
brackets. Use the Allen wrench (#H) to
tighten the bolts with the two parts
together.
IV. Repeat the process I through III above
to assemble the other ends of the side
rails (#2) onto the footboard (#3).
Step 2
Turn right (clockwise) to tighten
Page 4 of 6
Enlarged
Enlarged
#C x 8 pcs
#D x 8 pcs
#E x 8 pcs
I. Align the foot (#5) onto the pre-drilled holes on the bottom corner of the
headboard (#1).
II. Prepare two bolt assemblies by inserting FIRST the lock washer (#E)
onto the bolt (#C) and then the flat washer (#D) onto the SAME bolt
(#C), in that order.
III. Insert the bolt assemblies through the holes of the foot (#5) and secure
those bolts using the Allen wrench (#H) to lock them in with the
headboard (#1). Repeat the assembly for the other foot (#5) to the
other side of the headboard (#1).
IV. For the assembly of the feet (#5) to the footboard (#3), repeat the
process I through III of the above.
Turn right (clockwise) to tighten
#A x 8 pcs
#E x 8 pcs
#D x 8 pcs