Funkwerk elmeg t444 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 84

Funkwerk elmeg t444 Скачать руководство пользователя страница 59

When the installation has been performed correctly, the following entry will appear in the device manager under the
list of network cards:»elmeg Txxx USB Remote NDIS Network Device«.

Removing the default driver

If you have not installed the elmeg USB driver, the standard driver for »Composite USB device« will be installed by Windows. This is indica-
ted by an entry in the device manager under »Universal serial bus controller«. You must first remove this standard driver before you install
the new elmeg USB driver as explained under »Installation«.

·

Removing the driver.

·

Open the »Device manager« .

·

Remove the entry »Composite device« under »Universal serial bus controller«.

·

Remove the entry »elmeg« under »Other components«.

·

Then unplug the USB connector from the device and plug it in again. The device is recognized anew.

·

Install the new driver.

CAPI driver (Common ISDN Application Programming Interface):

Interfacing of the pabx to programs that provide data communication services.

Important for Installation of the CAPI driver

The CAPI driver is not required for accessing the Internet.

Before installing the new drivers be sure to remove any existing CAPI drivers in your system (such as the drivers for an installed ISDN card),
as Windows only supports one installed CAPI.
Refer to the operating instructions for the device concerned, or for the operating system, for details on removing drivers.

You can also use other programs that access the CAPI drivers for the PABX system. Refer to the operating instructions for the software pa-
ckages concerned for detailed information.

In some special circumstances it may be necessary to also physically remove the ISDN card from the PC in addition to
removing the drivers.

TAPI driver (Telephony Application Programming Interface)
Interfacing to programs that provide computer-aided telephony.
e.g.Windows dialing assistant

Special drivers must be installed if you wish to use the configuration software via the USB port of your PABX.

Installing programs from the CD

System requirements:

·

IBM or 100% compatible PC

·

Pentium or comparable processor, min. 233 MHz clock rate

·

min. 64 MB RAM

·

VGA graphics adapter, approx. 65,000 colors, a resolution of at least 1024x768 pixels.

·

CD ROM drive

·

Free USB-port

Drivers

55

«
...
57
58
59
60
61
...
»

Содержание elmeg t444





















































































Отзывы:

Нет отзывов