Frame Relay
bintec User’s Guide
27
Multiprotocol over Frame Relay Submenu
4
Table 4-8:
Selection options of
S
OURCE
P
ORT
and
D
ESTINATION
P
ORT
4.2.3
Submenu Advanced Settings
The fields of the
A
DVANCED
S
ETTINGS
submenu are described below.
Extended routing settings and other adjustments for the respective connection
partner can be made in the
M
ULTIPROTOCOL
OVER
F
RAME
R
ELAY
➜
ADD/EDIT
➜
IP
➜
A
DVANCED
S
ETTINGS
menu.
RIP
The entries in the routing table can be defined statically or the routing table can
be updated constantly by a dynamic exchange of routing information between
several gateways. This exchange is controlled by a Routing Protocol, e.g. RIP
(Routing Information Protocol).
server (5000....32767)
Server port numbers: 5000 ... 32767.
clients 1 (1024....4999)
Client port numbers: 1024 ... 4999.
clients 2 (32768....65535)
Client port numbers: 32768 ... 65535.
unpriv (1024...65535)
Unprivileged port numbers: 1024 ... 65535.
R4300 Setup Tool
Funkwerk Enterprise Communications GmbH
[FRAME RELAY][MPR][ADD][IP][ADVANCED]: Advanced X.25
MyGateway
MPR Settings (mpfr1)
RIP Send none
RIP Receive none
IP Accounting off
Back Route Verify off
Route Announce up or dormant
Proxy Arp off
Van Jacobson Header Compression off
OK CANCEL
Description
Meaning
