Funkwerk bintec R4100, Руководство пользователя

Страница: 24 / 36

4
22 bintec User’s Guide Frame Relay
Multiprotocol over Frame Relay Submenu
The M
ORE
R
OUTING
➜
ADD/EDIT menu consists of the following fields:
Field Description
Route Type Type of route. Possible values:
■
Host route (default value): Route to a single
host.
■
Network route : Route to a network.
■
Default route : The route is applied for all IP
addresses and if no other suitable route is
available.
Network Defines the type of connection. For possible
values see
table “Selection options in Network
field,” on page 23 .
The displayed value cannot be modified in this
menu. It depends on the setting of
IP T
RANSIT
N
ETWORK
in M
ULTIPROTOCOL OVER
F
RAME
R
ELAY
➜
ADD/EDIT
➜
IP
➜
B
ASIC
IP-S
ETTINGS
.
Destination IP Address Only for R
OUTE
T
YPE
= Host route or Network
route .
IP address of the destination host or network.
Netmask Only for R
OUTE
T
YPE
= Network rout e
Netmask for D
ESTINATION
IP A
DDRESS
If no entry is made the gateway uses a stan-
dard netmask.
Gateway IP Address Only for N
ETWORK
= WAN with transit network .
IP address of the host to which your gateway
should forward the IP packets.
Partner / Interface Only for N
ETWORK
= WAN without transit
network .
Displays the connection partner. Field cannot
be modified.