Frame Relay
bintec User’s Guide
13
Switching Submenu
3
3
Switching Submenu
The
S
WITCHING
➜
ADD/EDIT
menu is described below.
The
FR
➜
S
WITCHING
menu lists settings for each Frame Relay Virtual Circuit.
This menu is used to configure Frame Relay switching functionality on the gate-
way. When used as a Frame Relay switch, this menu can be used to configure
routes, or mappings (e.g., from incoming interface and corresponding DLCI to
outgoing interface and corresponding DLCI).
Frame Relay routes can be added, removed, or changed here.
Configuration is carried out in
FR
➜
S
WITCHING
➜
ADD/EDIT
.
The menu consists of the following fields:
R4300 Setup Tool
Funkwerk Enterprise Communications GmbH
[FRAME RELAY][SWITCHING][ADD]: Frame Relay Switching
MyGateway
Source Interface si4-0
Source DLCI 16
Destination Interface fr
Destination DLCI 16
Burst committed (Bc) 64000
Burst excess (Be) 0
Committed Information Rate (CIR) 64000
OK CANCEL
Field
Value
Source Interface
Here you select the source interface for this
route.
