TM250 / P/N 250TM-(xxx)-(xxx)
Operation and Installation
21
Document No.: 03.310.010.71e / Revision: 2.10
requested
the initialization has not yet occurred
searching
current comparison process, including status information
such as external and own position, the detected 24-bit
address (eg 3bcdef) and a progress bar will be
displayed.
failed
no match found
TRX error
no ADS-B reception
GPS error
no GPS position available
Whether the initialization was successful, can be determined during the
operation in the status display (see above) or on the information page
(2.6). In the event of a failed initialization there is no valid ICAO 24-bit
address displayed and setting of the own ICAO address must be made
by yourself on the information page (2.6).
If during multiple automatic searches no valid ICAO address is obtained,
you try to change the location of the aircraft. For example, already a
nearby hangar or tarmac may prevent the detection.
In flight, the ICAO address must be detected automatically without
problems, otherwise the own barometric altitude cannot be determined.
Do not make those settings by yourself, but leave this to the copilot.
If the automatic search is not successful in flight, check the settings in
the transponder. The transponder must be able to process the TM250
NMEA data at 4800 baud.
Check the automatically determined according to ICAO
address on their own!
