Functional Devices, Inc.
101 Commerce Drive
Sharpsville, IN 46068
Toll Free:
(800) 888-5538
Office:
(765) 883-5538
Fax:
(765) 883-7505
Email:
Website:
www.functionaldevices.com
page 6
FDLRxxx with Door/Window Sensor(s) FDLTMAG
• Relay activates with closed command from FDLTMAG and deactivates
with open command.
• FDLTMAG retransmits contact state every 20-30 minutes.
• Optional modes:
Repeater
,(see page 4)
Alarm
,
Delay
(see page 5)
FDLTMAG Link Procedure
1. Charge the FDLTMAG per Instructions provided with unit.
2. Apply power to FDLR product.
3. Press and hold LRN button on FDLR product until LED starts
flashing slowly (approximately 1/2 second).
4. Press and release Link button on FDLTMAG to transmit Teach
telegram.
5. LED on FDLR product will stay ON for 4 seconds acknowledging
telegram reception.
6. To learn more FDLTMAG, repeat steps 3-5.
WDWS-EN3
Rocker Switch
PTAC unit with RIBWxxxB-EN3
in Hotel Room Energy Control Mode
in Momentary Mode with Keycard Switch
and in Dimming Mode with FDLTS
(Wired through J Box)
FDLR20GV
FDLTMAG
FDLTS2
PTAC unit with FDLR20x or FDLR05x
Energy Saving Applications
0-10V Dimmable Fixture
Clearing ID’s from Memory
Global Clear (Reset to default settings)
Clears all linked devices, disables optional modes, turns relay OFF, and sets 0-10V output to minimum.
Performing Global Clear
1. Press and hold CLR button on FDLR product for 3 seconds until
LED begins slowly flashing.
a. Clear Mode will time out and exit in 30 seconds.
• Allows the user to Un-link a single transmitter from FDLR product.
• Maintains all optional mode settings.
Performing Single Device Clear
1. Repeating the Link procedure for a currently Linked device will
Un-link that device.
Single Device Clear
393278
FDLTKEY
Keycard Switch
