Functional Devices, Inc.
101 Commerce Drive
Sharpsville, IN 46068
Toll Free:
(800) 888-5538
Office:
(765) 883-5538
Fax:
(765) 883-7505
Email:
Website:
www.functionaldevices.com
Momentary Mode Link Procedure
1. Apply power to FDLR product.
2. Press and hold LRN button on FDLR product until LED starts flashing
slowly (approximately 1/2 second).
3. Press and hold LRN button on FDLR product for 3 seconds until LED
pattern changes to FLASH, FLASH, OFF (2 flashes).
4. Press and hold LRN button on FDLR Product for 3 seconds until LED
pattern changes again, to FLASH, FLASH, FLASH, OFF (3 flashes).
5. Press and release the button on the switch you are learning three
times quickly.
6. LED on FDLR product will stay ON for 4 seconds indicating telegram
reception.
7. To learn another switch, repeat steps 2-5.
D. Toggle Mode
• Each press and release of the switch causes the relay to
change state.
• Optional mode: Repeater (see page 4)
Toggle Mode Link Procedure
1. Apply power to FDLR product.
2. Press and hold LRN button on FDLR product until LED
starts flashing slowly (approximately 1/2 second).
3. Press and hold LRN button on FDLR product for 3 seconds
until LED pattern changes to FLASH, FLASH, OFF (2
flashes).
4. Press and hold LRN button on FDLR product for 3 seconds
until LED pattern changes again, to FLASH, FLASH, FLASH,
OFF (3 flashes).
5. Press and hold LRN button on FDLR product for 3 seconds
until LED flashes continuously.
6. Press and release the button on the switch you are learning
three times quickly.
7. LED on FDLR product will stay ON for 4 seconds indicating
telegram reception.
8. To learn another switch, repeat steps 2-6.
FDLTKEY Mode
Momentary Mode
• Relay activates when card is inserted and deactivates
when card is removed.
• Optional mode: Repeater (see page 4)
Momentary Mode Link Procedure
1. Apply power to FDLR product.
2. Press and hold LRN button on FDLR product until LED
starts flashing slowly (approximately 1/2 second).
3. Press and hold LRN button on FDLR product for 3 seconds
until LED pattern changes to FLASH, FLASH, OFF (2 flashes).
4. Press and hold LRN button on FDLR Product for 3 seconds
until LED pattern changes again, to FLASH, FLASH, FLASH,
OFF (3 flashes).
5. Insert and remove the card on the switch you are learning
three times quickly.
6. LED on FDLR product will stay ON for 4 seconds indicating
telegram reception.
7. To learn another switch, repeat steps 2-5.
page 3
FDLTS2 Modes (Continued)
Occupancy Detection
A. Manual ON
–
Auto OFF:
FDLR product receiving from both an Occupancy / Vacancy Sensor (FDLTVW or FDLTVC) and a Wall
Switch (FDLTS2)
• Relay activates when Rocker ON is pressed. Relay deactivates when Rocker OFF is pressed or 30 minutes after last detection of
occupancy.
• It may take up to 2 minutes for the FDLR product to respond to the Occupancy / Vacancy Sensor immediately following Link.
• Optional mode: Repeater (see page 4)
Manual ON – Auto OFF Learn Procedure
1. Be sure the Occupancy / Vacancy Sensor is charged
2. Apply power to FDLR product.
3. Press and hold LRN button on FDLR product until LED starts flashing slowly (approximately 1/2 second).
4. Trigger a Teach telegram from the Occupancy / Vacancy Sensor by pressing the Menu button once.
5. LED on FDLR product will stay ON for 4 seconds acknowledging telegram reception.
6. Press and hold LRN button on FDLR product for ½ second. LED will flash slowly.
7. Press and release rocker switch three times quickly.
8. LED on FDLR product will stay ON for 4 seconds acknowledging telegram reception.
9. To learn another switch, repeat steps 6-8.
B. Rocker Mode
• Relay activates when Rocker ON is pressed; relay deactivates when
Rocker OFF is pressed.
• Optional mode: Repeater (see page 4)
Rocker Mode Link Procedure
1. Apply power to FDLR product.
2. Press and hold LRN button on FDLR product until LED starts flashing
slowly (approximately 1/2 second).
3. Press and hold LRN button on FDLR Product for 3 seconds until LED
pattern changes to FLASH, FLASH, OFF (2 flashes).
4. Press and release the button on the switch you are learning three
times quickly.
5. LED on FDLR product will stay ON for 4 seconds indicating telegram
reception.
6. To learn another switch, repeat steps 2-4.
C. Momentary Mode
• Relay activates while switch is pressed and deactivates when switch
is released.
• Optional mode: Repeater (see page 4)
393278
