Functional Devices, Inc.
101 Commerce Drive
Sharpsville, IN 46068
Toll Free:
(800) 888-5538
Office:
(765) 883-5538
Fax:
(765) 883-7505
Email:
Website:
www.functionaldevices.com
393278
Getting Started
• Plan where you will mount each receiver and transmitter.
• Avoid transmitting along a length of wall, sharp angles and large obstructions.
• Avoid mounting inside a metal enclosure.
• Typical range is 100’ line of sight.
•
Link devices to each other before installing.
See linking instructions (per application) on following pages.
• All FDLR products must be powered during Link.
• PHC Gateway Controller can also link with an FDLR product and be bi-directional.
• Relay state at power-up can be set to ON, OFF, or LAST STATE (default).
• Each FDLR product can be Linked to up to 30 transmitters of any combination.
page 1
902 MHz Model
Power Input (Vac)
Contact Rating (A)
Transmission Source
EEP
FDLR20GV
120-277Vac
20
Status Change/Heartbeat
A5-11-01
FDLTMAG
None
NA
Contact Closure
D5-00-01
FDLTS2
None
NA
Button Press
F6-02-02
FDLTKEY
None
NA
Insert/Remove Card
F6-04-01
FDLTVC
None
NA
Occupancy Detected
A5-07-01
FDLTVW
None
NA
Occupancy Detected
A5-07-01
FDLR20GV
FDLTMAG
FDLTS2
(Switch and
cover plate)
LRN CLR
FDLTKEY
Functional Devices, Inc.’s EnOcean
®
Manufacturer ID is 0x055.
FDLTVC
FDLTVW
B2489
ESRB and ESRN
Installation & Safety Instructions
Compatible Device from other Manufacturers
PHC Gateway Controller
EEP A5-38-08
0x02 (Dimming Profile)
Light Level Sensor
EEP A5-06-02
