A: Bolt M8×16 1pcs
B: Number board bracket
C: Steering rod plate
1. Place the bracket (B) on the
steering rod plate (C) with the hole
in alignment.
2. Install the bolt (A) and tighten it
with 10mm open end wrench
ASSEMBLY HANDLEBAR
WARNING
:
Failing to properly adjust and tighten the bolts that affix the handlebars can cause you to lose
control and crash.
A: Bolt M8×50 4pcs
B: Upper Clamp
C: Bottom Clamp
D: Steering rod bracket
E: Handle bar
1. Put the bottom clamp(C) on the steering
rod plate(D) with the screw hole in
alignment, and place the handlebar (E) in
the bottom clamp, then cover the upper
clamp (B) on the handlebar and install the
4pcs bolt (A).
2. Place the handlebar in the upright and
vertical position, then tighten all the bolts
securely with 10mm socket spanner.
