41
Reco
rdin
g
EN
Dubbing from the external
devices
When you dub a title has bilingual audio to Video
mode DVD-RW / R, select an appropriate audio
format in the “Bilingual Recording Audio” menu on
page 30.
1
Turn on the TV. Select the
appropriate external input channel.
(See pages 15 to 16.)
2
Select the media.
Dubbing to HDD:
Press [HDD] first.
Dubbing to DVD:
Press [DVD] first and insert a disc.
• It may take awhile to load the disc.
3
Select the appropriate external input
channel of this unit by pressing
[INPUT SELECT]. You also can use
[PROG.
/
].
• If you are using the jacks on the front, set the
channel to “AV3”.
• If you are using the jacks on the rear, set the
channel to “AV1” and “AV2”.
4
Select a Rec Mode by pressing
[REC MODE].
Refer to “Rec Mode” on page 26.
5
Press [REC
I
] (of the dubbing
device) on this unit to start dubbing.
6
Press the PLAY button on the
external device to dub from.
7
For HDD or DVD:
Press [STOP
S
] on the unit (this unit)
first to stop dubbing.
• This operation may take awhile to be completed.
Then stop the external device.
Note
• To avoid mistakes, it is recommended to use the
buttons on the front panel to operate.
• Read also the instructions for the external device
thoroughly.
• If you want to monitor the programme that you are
recording, make sure the device such as a Satellite
Box is turned off when it is connected to AV2.
• NTSC dubbing is prohibited in this unit.
Finalising a disc
In order to play back discs recorded in this unit on
other player, you must finalise the discs.
• Although finalisation is recommended, you may be
able to play the VR mode discs on other unit without
finalising. With regard to the Video mode discs, you
MUST finalise them before playing them back on
other player.
• After DVD-R discs are finalised, additional
recording, editing and undo finalisation are
impossible.
• For DVD-R and Video mode DVD-RW discs, a DVD
menu is created automatically after finalising discs,
and title list for the discs will no longer be available.
Finalise
You must first finalise the disc before playing it back
on other unit.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select “Disc Management” using
[Cursor
/
], then press [ENTER].
3
Select “DVD Disc Control” using
[Cursor
/
], then press [ENTER].
4
Select “Finalise” using
[Cursor
/
], then press [ENTER].
HDD
HDD
DVD-RW
DVD-RW
VR
DVD-RW
DVD-RW
Video
DVD-R
DVD-R
DVD-RW
DVD-RW
VR
DVD-RW
DVD-RW
Video
DVD-R
DVD-R
Setup Menu
10/04/06(Mon)
19:34
Disc Management
Editing
Editing
Dubbing
Dubbing
Timer Programme
Timer Programme
Title List
Title List
Initial Setting
Initial Setting
Digital Audio Setting
Digital Audio Setting
Playback
Playback
Recording
Recording
Display
Display
HDD Initialise
DVD Format
10/04/06(Mon)
19:34
Disc Management
Auto Finalise
Disc Protect
Finalise
DVD Disc Control
E2B21BD_E2B28BD_EN.book Page 41 Monday, August 21, 2006 5:05 PM