18
In
itial Setups
EN
For the first time use
Right after the purchase of the unit, do the Initialise
Setting by doing the following procedures.
This menu may not appear if you have already turned
on the unit.
1
After making all the necessary
connections, turn on the TV. Select
the appropriate external input
channel.
(See pages 15 to 16.)
2
Press [STANDBY-ON].
3
Press [ENTER] to start Auto Channel
Tuning.
If you like to skip this step, press
[RETURN]
.
4
Use [Cursor
/
/ /
] to set
current time then press [ENTER].
Channel Setting
Auto Tuning
If you have already set the channels when you first
turned on the unit, you can skip this section.
After resetting the settings or whenever you move to a
new area, we recommend you to programme available
channels in your area with the following procedures.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select “Initial Setting” using
[Cursor
/
], then press [ENTER].
3
Select “Channel Setting” using
[Cursor
/
], then press [ENTER].
4
Select “Auto Tuning” using
[Cursor
/
], then press [ENTER].
The unit will start storing channels available in
your area.
Initial Setups
--/--/--(---)
--:--
Auto Tuning
Auto Tuning Now
Auto Tuning Now
OK
Initial Setting
--/--/--(---)
--:--
Clock Setting
/ 01 / 2006 (Sun) -- : --
01
Setup Menu
10/04/06(Mon)
19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
Initial Setting
Clock Setting
TV Aspect
Select Video
Video Out
Channel Setting
10/04/06(Mon)
19:34
10/04/06(Mon)
19:34
Initial Setting
Clock Setting
TV Aspect
Select Video
Video Out
Channel Setting
Manual Tuning
Manual Tuning
Move
Move
Auto Tuning
E2B21BD_E2B28BD_EN.book Page 18 Monday, August 21, 2006 5:05 PM
